Mig & Tig Welder
2 weeks ago
Qualifications and Education Requirements
- At least 2years' experience in Mig & Tig welding both stainless steel and aluminum
- Red seal certificate in welding or minimum 2 years' experience as per point 1 above
Grade 1
- Ability to read, understand and interpret technical drawings.
Preferred Skills & Traits
- Honesty
- Focused and detail oriented.
- Meticulous and accurate.
- Good Communication Skills.
- Physically fit and strong
- Technically oriented
Key performance indicators
- Follow standard operating / welding procedure
- Setup welding machine for optimal welding on material & components to be welded
- Conducting Pre & Post welding inspections and recording critical dimensions
- Low nonconformance rate on welding
- Overall low scrap ratio
- Report any nonconformance or scrap part to department head immediately
- Maintain company standard on all welding.
- Maintain production targets and minimum requirements daily.
- Maintain welding equipment, tools, gauges, measuring equipment and machinery in clean and good working condition.
- General housekeeping at workstation
- Timeous Completing of all relevant production documentation
- Updating Rhinoman production system in real time
- Comply to Health & safety code
Role and Responsibilities
- Read & interpret technical drawings.
- Material identification.
- Jigging & fabrication
- Preliminary visual inspection of parts to be welded for visible damages. Scratches, dents, cutting defects faulty bending (not bend according to notches).
- Pre weld inspection: recording of critical dimensions acc to drw, measuring and recording of physical critical dimensions, Gauging parts with checking gauges for conformance.
- Reporting of any nonconformances before commencing with welding. HOD to sign off
- Correct setup of welding machine, welding gas, gauges and clamps.
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of preassembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily.
Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
- All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
-
Alu & S/s Mig & Tig Welder
2 weeks ago
Pretoria, Gauteng, South Africa Motus Aftermarket Parts Full timeRhinoman is searching for a Mig and Tig Welder to join the branch in Rosslyn. the purpose of the position is Tig and Mig Welding of canopy kit components and canopy Kits.Requirements and Experience At least years' experience in Mig and Tig welding on both stainless steel and aluminium Red seal certificate in welding or minimum 2 years' experience as per...
-
Alu & S/s Mig & Tig Welder
2 weeks ago
Pretoria, Gauteng, South Africa Unique Personnel Full timeJob Number 70687Job Type PermanentJob Title Alu & S/S Mig & Tig WelderComputer Skills Ms OfficeIndustry AutomotiveCity Tshwane (Pretoria)Province GautengPrimary Purpose of Job: Stainless steel and Aluminum TIG & MiG weldingDuties Read & interpret technical drawings. Material identification. Jigging & fabrication Preliminary visual inspection of parts to be...
-
Welder Special Class
2 weeks ago
Pretoria, Gauteng, South Africa TECHAUSEN Full timeTrade test as coded welder Proven experience in HDPE welding. Possess a Welding Certificate Have a strong knowledge of different welding techniques, including MIG, TIG, and ARC. Experience with HDPE, stainless steel and foodgrade welding will be advantageous. Attention to detail, problemsolving skills- construction and power generation experience. Drivers...
-
Welder
2 weeks ago
Pretoria, Gauteng, South Africa Specialist Mechanical Engineers Full timeWelderPurpose of Job:Duties and Responsibilities:Read and understand blueprints prior to starting a project.Measuring and cutting materials to specifications.Welding material together to produce the finished product.Test and inspect welded surfaces and structures to discover flaws.Monitor machinery for appropriate usage and temperature.Weld components in...
-
Boilermaker/welder
2 weeks ago
Pretoria, Gauteng, South Africa ILF Solutions Full timeJob Title: Boilermaker/Welder x 1Requirements:Proven experience as welder/boilermaker with Red Seal (Trade Test). Experience using a variety of welding equipment and procedures (TIG, MIG, Oxy Acetylene etc.). Experience in using electrical or manual tools (saws, squares, calipers etc.). Ability to read and interpret technical documents and drawings....
-
Aluminium Welder
2 weeks ago
Pretoria, Gauteng, South Africa Specialist Mechanical Engineers Full timePurpose of Job:Duties and Responsibilities:Read and understand Manufacturing drawings and welding symbols.Measuring and cutting materials to specifications.Welding material together to produce the finished product.Test and inspect welded surfaces and structures to discover flaws.Monitor machinery for appropriate usage and temperature.Weld components in flat,...
-
Co2 Welder
2 weeks ago
Pretoria, Gauteng, South Africa Nova Engineering Works Pty Ltd Full timeCo2 Welder with minimum 3 years Experience and Tig Welding experience a must.Job Types: Full-time, TemporaryContract length: 3 monthsAbility to commute/relocate: Gauteng, Gauteng: Reliably commute or planning to relocate before starting work (required)Language: English (required)License/Certification: Welding Certificate (required)
-
Welder/fabricator
2 weeks ago
Pretoria, Gauteng, South Africa PMG Recruitment Services Full timeMy client is looking for a boilermaker / metal fabricators in Pretoria. They are looking for someone who we can build up into becoming the workshop manager in the next 12 months. The successful person will need to be ambitious, willing to take on responsibility. This is a small company that is growing and are looking for someone who will grow with the...
-
Metal Engineering Trades Roles
2 weeks ago
Pretoria, Gauteng, South Africa Workforcexs Full timeAustralia Work Contract VISA 400 70k AUD SalaryWe are seeking experienced workers who have CNC Milling, CNC Turning, Horizontal Boring, Grinding & Welders, Fitters, Lathe Turning - Sydney, Melbourne, Adelaide & Brisbane within the engineering Industry.We are looking for people who can start ASAP relocation assistance can be provided we also welcome current...
-
Boilermaker/metal Fabricator
2 weeks ago
Pretoria, Gauteng, South Africa IntelliStaff Full time_Location:_: Weavind Park, Pretoria__Requirements:_- _ Matric_- _ Boilermaker Trade Test_- _ 3-5 years of experience as a Boilermaker/Metal Fabricator in the Manufacturing industry_- _ Must have MIG Welding and TIG Weld_- _ Must have your own vehicle_- _ Must have the ability to read manufacturing designs__ Responsibilities:_- _ Read manufacturing designs_-...
-
Boilermakers / Assemblers
2 weeks ago
Pretoria, Gauteng, South Africa Leita Steel (PTY) LTD Full timeBoilermaker / Assembler PositionWe are looking for Boilermakers / Assemblers for Structural Steel.Experience Required: Structural Steel fabrication Experienced Mig/GMAW welder Trade qualified Boilermaker / Assembler 5 Years Relevant Industry experience. Ability to read and understand drawings Attention to detailResponsibilities: Ensure the safe and proper...
-
Maintenance Fitter
2 weeks ago
Pretoria, Gauteng, South Africa Tharisa Minerals Full time_Maintenance Fitter _Job Responsibilities and DutiesMaintenance Fitters craft, assemble and fit parts to heavy machinery and industrial equipment. They also install, maintain and repair a range of heavy machinery and industrial tools including their mechanical and hydraulic components.Job Role Interpreting drawings, diagrams and specifications and...
-
Mig/tig Welder
3 weeks ago
Pretoria, South Africa Kare Sheet Metal Products Full timeSheet Metal Manufacturing company based is Hermanstad Pretoria West have an open position for a TIG/MIG Welder. Need to have 2 years experience in TIG/MIG Welding. Need to be able to read drawings and welding symbols. **Job Type**: Permanent **Salary**: From R5,000.00 per month Ability to commute/relocate: - Pretoria, Gauteng: Reliably commute or...
-
Alu & S/s Mig & Tig Welder
4 weeks ago
Pretoria, South Africa Motus Aftermarket Parts Full time**Rhinoman** is searching for a **Mig and Tig Welder **to join the branch in **Rosslyn**. the purpose of the position is Tig and Mig Welding of canopy kit components and canopy Kits. **Requirements and Experience** - At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium - Red seal certificate in welding or minimum 2...
-
Mig & Tig Welder
2 months ago
Pretoria, South Africa Motus Aftermarket Parts Full timeThe purpose of the job is for Tig & Mig welding of Canopy kit components & Canopy Kits **Qualifications and Education Requirements** - At least 2-years’ experience in Mig & Tig welding both stainless steel and aluminum - Red seal certificate in welding or minimum 2 years’ experience as per point 1 above - Grade 12 - Ability to read, understand and...
-
Mig & Tig Welder
3 days ago
Pretoria, South Africa Motus Aftermarket Parts Full timeThe purpose of the job is for Tig & Mig welding of Canopy kit components & Canopy Kits **Qualifications and Education Requirements** - At least 2-years’ experience in Mig & Tig welding both stainless steel and aluminum - Red seal certificate in welding or minimum 2 years’ experience as per point 1 above - Grade 12 - Ability to read, understand and...
-
Alu & S/s Mig & Tig Welder
3 weeks ago
Pretoria, South Africa Unique Personnel Full time**Job Number** - 70687 **Job Type** - Permanent **Job Title** - Alu & S/S Mig & Tig Welder **Computer Skills** - Ms Office **Industry** - Automotive **City** - Tshwane (Pretoria) **Province** - Gauteng **Primary Purpose of Job**: - Stainless steel and Aluminum TIG & MiG welding **Duties** - Read & interpret technical drawings. - Material...
-
Tig Welder
2 months ago
Pretoria West, South Africa Kare Sheet Metal Products Full timeSheet Metal Manufacturing Company based in Hermanstad, Pretoria-West have an open position for a TIG Welder, need to have previous experience in Tig Welding and be able to read drawings with ISO & AWS Welding Symbols.
-
Specialized Welder New
3 weeks ago
Pretoria, South Africa Placement Dynamics Full time**SPECIALIZED WELDER** **NEW** **Location**: - Pretoria West**Offer**: - Market related**Available**: - Immediate or ASAP**Type**: - Permanent Our client has a vacancy for a Specialized Welder with a minimum of 3 years working experience. **Qualifications**: - Relevant Welding qualification **Essential**- MIG-welding and TIG-welding or STICK-welding...
-
Tig Welder/fabricator
3 weeks ago
Pretoria, South Africa Bruiser Cruiser Full time**TIG Welder / Fabricator** This position is Monday-Saturdays. Position available immediately. **Salary**: R10,000.00 - R18,000.00 per month Ability to commute/relocate: - Pretoria North, Gauteng: Reliably commute or planning to relocate before starting work (required) Willingness to travel: - 100% (required)
-
Welder
4 weeks ago
Pretoria, South Africa Specialist Mechanical Engineers Full time**Welder** **Purpose of Job**: **Duties and Responsibilities**: 1. Read and understand blueprints prior to starting a project. 2. Measuring and cutting materials to specifications. 3. Welding material together to produce the finished product. 4. Test and inspect welded surfaces and structures to discover flaws. 5. Monitor machinery for appropriate usage...
-
Welder Special Class
3 days ago
Pretoria, South Africa TECHAUSEN Full timeTrade test as coded welder - Proven experience in HDPE welding. - Possess a Welding Certificate - Have a strong knowledge of different welding techniques, including MIG, TIG, and ARC. - Experience with HDPE, stainless steel and food-grade welding will be advantageous. - Attention to detail, problem-solving skills - construction and power generation...
-
Aluminium Welder
4 weeks ago
Pretoria, South Africa Specialist Mechanical Engineers Full time**Purpose of Job**: **Duties and Responsibilities**: 1. Read and understand Manufacturing drawings and welding symbols. 2. Measuring and cutting materials to specifications. 3. Welding material together to produce the finished product. 4. Test and inspect welded surfaces and structures to discover flaws. 5. Monitor machinery for appropriate usage and...
-
Welder/boilermaker
2 weeks ago
Pretoria North, South Africa Bruiser Cruiser Full timeWelder / Boilermaker PositionWe have a position available for a skilled Welder that specialises in TIG welding to join our team on a full time basis at our Production Workshop near Hamanskraal/Pretoria North.This position is Monday-Saturdays.Position available immediately.Salary: R8, R15,000.00 per monthAbility to commute/relocate: Pretoria North, Gauteng:...
-
Metal Engineering Trades Roles
4 weeks ago
Pretoria, South Africa Workforcexs Full timeAustralia Work - Contract VISA 400 - 70k AUD Salary We are seeking experienced workers who have CNC Milling, CNC Turning, Horizontal Boring, Grinding & Welders, Fitters, Lathe Turning - Sydney, Melbourne, Adelaide & Brisbane within the engineering Industry. We are looking for people who can start ASAP relocation assistance can be provided we also welcome...
-
Boilermaker / Metal Fabricators
2 months ago
Pretoria, South Africa Sentinel Staffing Services Full time**Requirements**: - MIG-welding - TIG-welding - MUST HAVE OWN TRANSPORT - 3-5 Years Experience **Qualifications needed**: - Preferably qualifications in line with a boiler maker and metal fabrication. - They will need to be able to read a manufacturing design - MIG-welding - TIG-welding - Bending metal NB Rolling of metal NB
-
Boilermaker/metal Fabricator
2 months ago
Pretoria, South Africa Unique Personnel Full time**Job Number** - 68748 **Job Type** - Permanent **Job Title** - Boilermaker/Metal fabricator **Computer Skills** - MS Office **Industry** - Furniture **City** - Tshwane (Pretoria) **Province** - Gauteng - Full Function Boilermaker/Metal fabricator- **Inherent Requirements** **Years of experience required**: - 3 to 5 years**Qualifications needed**: -...
-
Boilermaker / Metal Fabricator - Own Vehicle
2 months ago
Pretoria, South Africa Placement Dynamics Full time**BOILERMAKER / METAL FABRICATOR - Own vehicle essential** **NEW** **Location**: - Pretoria East**Offer**: - R18 000, 00 CTC**Starting date**: - 1 March 2023**Type**: - Temporary for 6 months- After 6 months if both parties are happy, permanent employment will be offered**Application Instruction**: Our client is looking for a Boilermaker / Metal...
-
Boilermaker / Metal Fabricator
3 weeks ago
Pretoria, South Africa Hutech Head Office Full time**_Position: Boilermaker / Metal Fabricator_** **_Location: Pretoria, Gauteng_** **_Salary: R 18 000.00 CTC maximum_** **_Hours: 07h45 16h30 (Mon Fri)_** **_Reporting: Director_** **_Start Date: 1 March 2023_** **Introduction**: We are looking for someone who is serious about being with the company for a long period of time and who has enough...
-
Boilermakers / Assemblers
4 weeks ago
Pretoria, South Africa Leita Steel (PTY) LTD Full time**Boilermaker / Assembler Position** We are looking for Boilermakers / Assemblers for Structural Steel. **Experience Required**: - Structural Steel fabrication - Experienced Mig/GMAW welder - Trade qualified Boilermaker / Assembler - 5 Years Relevant Industry experience. - Ability to read and understand drawings - Attention to...
-
Boilermaker / Metal Fabricator
3 weeks ago
Pretoria, South Africa The Hutech International Group Full timeGauteng, Tshwane (Pretoria) - (Market related) **_ A leading luxurious Decor and Furniture company in the manufacturing industry is looking for a Boilermaker / Metal Fabricator to join their team._** **_ Position: Boilermaker / Metal Fabricator_** **_Location: Pretoria, Gauteng_** **_Salary: R 18 000.00 CTC maximum_** **_Hours: 07h45 - 16h30 (Mon -...