Alu & S/s Mig & Tig Welder

3 weeks ago

Pretoria, South Africa Unique Personnel Full time

**Job Number**
- 70687

**Job Type**
- Permanent

**Job Title**
- Alu & S/S Mig & Tig Welder

**Computer Skills**
- Ms Office

**Industry**
- Automotive

**City**
- Tshwane (Pretoria)

**Province**
- Gauteng

**Primary Purpose of Job**:

- Stainless steel and Aluminum TIG & MiG welding

**Duties**
- Read & interpret technical drawings.
- Material identification.
- Jigging & fabrication
- Preliminary visual inspection of parts to be welded for visible damages. Scratches, dents, cutting defects faulty bending (not bend according to notches).
- Pre weld inspection: recording of critical dimensions acc to drw, measuring and recording of physical critical dimensions, Gauging parts with checking gauges for conformance.
- Reporting of any non-conformances before commencing with welding. HOD to sign off
- Correct setup of welding machine, welding gas, gauges and clamps.
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
- All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.**Inherent Requirements**
- At least 2-years’ experience in Mig & Tig welding both stainless steel and aluminum
- Red seal certificate in welding or minimum 2 years’ experience as per point 1 above
- Grade 12
- Ability to read, understand and interpret technical drawings.

**Preferred Skills & Traits**
- Honesty
- Focused and detail oriented.
- Meticulous and accurate.
- Good Communication Skills.
- Physically fit and strong
- Technically oriented

**Key Performance Indicators**
- Follow standard operating / welding procedure
- Setup welding machine for optimal welding on material & components to be welded
- Conducting Pre & Post welding inspections and recording critical dimensions
- Low non-conformance rate on welding
- Overall low scrap ratio
- Report any non-conformance or scrap part to department head immediately
- Maintain company standard on all welding.
- Maintain production targets and minimum requirements daily.
- Maintain welding equipment, tools, gauges, measuring equipment and machinery in clean and good working condition.
- General housekeeping at workstation
- Timeous Completing of all relevant production documentation
- Updating Rhinoman production system in real time
- Comply to Health & safety code

**What Qualification**
- Red seal certificate in Welding

**Minimum Qualification**
- Certificate

**Status**
- Available

  • Alu & S/s Mig & Tig Welder

    4 weeks ago

    Pretoria, South Africa Motus Aftermarket Parts Full time

    **Rhinoman** is searching for a **Mig and Tig Welder **to join the branch in **Rosslyn**. the purpose of the position is Tig and Mig Welding of canopy kit components and canopy Kits. **Requirements and Experience** - At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium - Red seal certificate in welding or minimum 2...

  • Alu & S/s Mig & Tig Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Unique Personnel Full time

    Job Number 70687Job Type PermanentJob Title Alu & S/S Mig & Tig WelderComputer Skills Ms OfficeIndustry AutomotiveCity Tshwane (Pretoria)Province GautengPrimary Purpose of Job: Stainless steel and Aluminum TIG & MiG weldingDuties Read & interpret technical drawings. Material identification. Jigging & fabrication Preliminary visual inspection of parts to be...

  • Alu & S/s Mig & Tig Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Motus Aftermarket Parts Full time

    Rhinoman is searching for a Mig and Tig Welder to join the branch in Rosslyn. the purpose of the position is Tig and Mig Welding of canopy kit components and canopy Kits.Requirements and Experience At least years' experience in Mig and Tig welding on both stainless steel and aluminium Red seal certificate in welding or minimum 2 years' experience as per...

  • Mig/tig Welder

    3 weeks ago

    Pretoria, South Africa Kare Sheet Metal Products Full time

    Sheet Metal Manufacturing company based is Hermanstad Pretoria West have an open position for a TIG/MIG Welder. Need to have 2 years experience in TIG/MIG Welding. Need to be able to read drawings and welding symbols. **Job Type**: Permanent **Salary**: From R5,000.00 per month Ability to commute/relocate: - Pretoria, Gauteng: Reliably commute or...

  • Mig & Tig Welder

    2 months ago

    Pretoria, South Africa Motus Aftermarket Parts Full time

    The purpose of the job is for Tig & Mig welding of Canopy kit components & Canopy Kits **Qualifications and Education Requirements** - At least 2-years’ experience in Mig & Tig welding both stainless steel and aluminum - Red seal certificate in welding or minimum 2 years’ experience as per point 1 above - Grade 12 - Ability to read, understand and...

  • Mig & Tig Welder

    3 days ago

    Pretoria, South Africa Motus Aftermarket Parts Full time

    The purpose of the job is for Tig & Mig welding of Canopy kit components & Canopy Kits **Qualifications and Education Requirements** - At least 2-years’ experience in Mig & Tig welding both stainless steel and aluminum - Red seal certificate in welding or minimum 2 years’ experience as per point 1 above - Grade 12 - Ability to read, understand and...

  • Mig & Tig Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Motus Aftermarket Parts Full time

    The purpose of the job is for Tig & Mig welding of Canopy kit components & Canopy KitsQualifications and Education Requirements At least 2years' experience in Mig & Tig welding both stainless steel and aluminum Red seal certificate in welding or minimum 2 years' experience as per point 1 above Grade 1 Ability to read, understand and interpret technical...

  • Tig Welder

    2 months ago

    Pretoria West, South Africa Kare Sheet Metal Products Full time

    Sheet Metal Manufacturing Company based in Hermanstad, Pretoria-West have an open position for a TIG Welder, need to have previous experience in Tig Welding and be able to read drawings with ISO & AWS Welding Symbols.

  • Specialized Welder New

    3 weeks ago

    Pretoria, South Africa Placement Dynamics Full time

    **SPECIALIZED WELDER** **NEW** **Location**: - Pretoria West**Offer**: - Market related**Available**: - Immediate or ASAP**Type**: - Permanent Our client has a vacancy for a Specialized Welder with a minimum of 3 years working experience. **Qualifications**: - Relevant Welding qualification **Essential**- MIG-welding and TIG-welding or STICK-welding...

  • Tig Welder/fabricator

    3 weeks ago

    Pretoria, South Africa Bruiser Cruiser Full time

    **TIG Welder / Fabricator** This position is Monday-Saturdays. Position available immediately. **Salary**: R10,000.00 - R18,000.00 per month Ability to commute/relocate: - Pretoria North, Gauteng: Reliably commute or planning to relocate before starting work (required) Willingness to travel: - 100% (required)

  • Welder Special Class

    3 days ago

    Pretoria, South Africa TECHAUSEN Full time

    Trade test as coded welder - Proven experience in HDPE welding. - Possess a Welding Certificate - Have a strong knowledge of different welding techniques, including MIG, TIG, and ARC. - Experience with HDPE, stainless steel and food-grade welding will be advantageous. - Attention to detail, problem-solving skills - construction and power generation...

  • Welder

    4 weeks ago

    Pretoria, South Africa Specialist Mechanical Engineers Full time

    **Welder** **Purpose of Job**: **Duties and Responsibilities**: 1. Read and understand blueprints prior to starting a project. 2. Measuring and cutting materials to specifications. 3. Welding material together to produce the finished product. 4. Test and inspect welded surfaces and structures to discover flaws. 5. Monitor machinery for appropriate usage...

  • Welder Special Class

    2 weeks ago

    Pretoria, Gauteng, South Africa TECHAUSEN Full time

    Trade test as coded welder Proven experience in HDPE welding. Possess a Welding Certificate Have a strong knowledge of different welding techniques, including MIG, TIG, and ARC. Experience with HDPE, stainless steel and foodgrade welding will be advantageous. Attention to detail, problemsolving skills- construction and power generation experience. Drivers...

  • Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Specialist Mechanical Engineers Full time

    WelderPurpose of Job:Duties and Responsibilities:Read and understand blueprints prior to starting a project.Measuring and cutting materials to specifications.Welding material together to produce the finished product.Test and inspect welded surfaces and structures to discover flaws.Monitor machinery for appropriate usage and temperature.Weld components in...

  • Aluminium Welder

    4 weeks ago

    Pretoria, South Africa Specialist Mechanical Engineers Full time

    **Purpose of Job**: **Duties and Responsibilities**: 1. Read and understand Manufacturing drawings and welding symbols. 2. Measuring and cutting materials to specifications. 3. Welding material together to produce the finished product. 4. Test and inspect welded surfaces and structures to discover flaws. 5. Monitor machinery for appropriate usage and...

  • Boilermaker/welder

    2 weeks ago

    Pretoria, Gauteng, South Africa ILF Solutions Full time

    Job Title: Boilermaker/Welder x 1Requirements:Proven experience as welder/boilermaker with Red Seal (Trade Test). Experience using a variety of welding equipment and procedures (TIG, MIG, Oxy Acetylene etc.). Experience in using electrical or manual tools (saws, squares, calipers etc.). Ability to read and interpret technical documents and drawings....

  • Aluminium Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Specialist Mechanical Engineers Full time

    Purpose of Job:Duties and Responsibilities:Read and understand Manufacturing drawings and welding symbols.Measuring and cutting materials to specifications.Welding material together to produce the finished product.Test and inspect welded surfaces and structures to discover flaws.Monitor machinery for appropriate usage and temperature.Weld components in flat,...

  • Welder/boilermaker

    2 weeks ago

    Pretoria North, South Africa Bruiser Cruiser Full time

    Welder / Boilermaker PositionWe have a position available for a skilled Welder that specialises in TIG welding to join our team on a full time basis at our Production Workshop near Hamanskraal/Pretoria North.This position is Monday-Saturdays.Position available immediately.Salary: R8, R15,000.00 per monthAbility to commute/relocate: Pretoria North, Gauteng:...

  • Co2 Welder

    2 weeks ago

    Pretoria, Gauteng, South Africa Nova Engineering Works Pty Ltd Full time

    Co2 Welder with minimum 3 years Experience and Tig Welding experience a must.Job Types: Full-time, TemporaryContract length: 3 monthsAbility to commute/relocate: Gauteng, Gauteng: Reliably commute or planning to relocate before starting work (required)Language: English (required)License/Certification: Welding Certificate (required)

  • Metal Engineering Trades Roles

    4 weeks ago

    Pretoria, South Africa Workforcexs Full time

    Australia Work - Contract VISA 400 - 70k AUD Salary We are seeking experienced workers who have CNC Milling, CNC Turning, Horizontal Boring, Grinding & Welders, Fitters, Lathe Turning - Sydney, Melbourne, Adelaide & Brisbane within the engineering Industry. We are looking for people who can start ASAP relocation assistance can be provided we also welcome...