Overhead Crane Operator
2 weeks ago
The **Overhead Crane Operator** Is responsible for operating a stationary or mobile overhead crane to move, lift and position materials safely at construction sites. The successful incumbent should operate cranes efficiently, take complete charge of all safety, clean and maintain the hoisting mechanisms, and handle the process of job billing. Ultimately, a top-notch crane operator should set and maintain a standard of accuracy, be able to work in extreme weather conditions, and operate the crane according to verbal, written, or signal instruction.
**Key Responsibilities**:
- Maintaining crane safety through inspection, operation, maintenance, and repair of equipment, including rigging.
- Observing work being done by others to ensure that it meets safety standards and good construction practices.
- Operating cranes to move construction materials such as steel beams, concrete blocks, and pipes from one location to another.
- Coordinating with other construction workers to lift materials into place or remove them as needed.
- Operating hoists to lift, lower, move, or position materials or equipment.
- Coordinating with other workers to perform the installation or removal of equipment such as rigging, scaffolding, and lifting devices.
- Inspecting equipment and structures to ensure they are safe and stable.
- Operating cranes using controls that are located inside or outside the cab depending on the type of crane used.
- Maintaining logbooks of crane operations, equipment checks, and maintenance activities.
- Procure and inspect rigging, attach rigging to load, check travel path, sound whistle, signal crane operator, guide load to destination, position load, detach rigging and return to storage rack.
- Ensure load is properly secured.
- Review rigging work prior to lifting.
- Operating the crane under limited supervision.
- Inspecting the crane to ensure its safety.
- Performing routine maintenance.
- Carrying tools for running repairs.
- Understanding and executing the job billing process.
- Driving the crane to a worksite.
- Wearing PPE safety equipment.
- Cleaning and maintaining the crane hoisting mechanism.
- Using lever and pedal controls efficiently.
- Setting up the manufacturers operator manual.
**Essential Requirements**:
- Matric (Grade 12)
- Overhead crane operator certification
- 5+ years experience as an overhead crane operator
- 5+ years rigging experience is essential.
- Proven safety record with no accidents or incidents
- Ability to operate 25-ton overhead crane with uneven distribution.
- Excellent hand-eye coordination.
- Experience with computerized crane operation systems
- Familiarity with quality control procedures
- No criminal record
**Beneficial Requirements**:
- Must be able to work in a fast-paced environment.
- Must possess organizational and problem-solving skills.
- Must be able to work with a team.
- Must be able to communicate using oral and basic written communication.
- Physical ability to stand, crouch, and lift objects throughout your shift
- Forklift experience or a forklift operator license (preferred)
-
FITTER with OVERHEAD CRANE experience
Found in: Talent ZA C2 - 2 weeks ago
Johannesburg, South Africa Pronto Labour Team (Pty) Ltd Full timeFITTER with OVERHEAD CRANE experience -Springs area, GautengMECHANICAL FITTER with OVERHEAD CRANE experience* Knowledge in: Pumps Conveyors Annealing Furnaces Induction Furnaces Compressors Generators* Prepared to work overtime, if and when required
-
Overhead Crane Technician
Found in: Talent ZA C2 - 2 weeks ago
Johannesburg, South Africa Oxyon People Solutions Full timeUrgently looking for an Overhead Crane Technician to work in Vanderbijlpark. Vaal TriangleMust have at least 5 years experienceRated highly negotiable
-
FITTER with OVERHEAD CRANE experience
Found in: Whatjobs ZA C2 - 4 days ago
Johannesburg, South Africa Pronto Labour Team Full timeMECHANICAL FITTER with OVERHEAD CRANE experience * Knowledge in: Pumps Conveyors Annealing Furnaces Induction Furnaces Compressors Generators* Prepared to work overtime, if and when required
-
FITTER with OVERHEAD CRANE experience
Found in: Adzuna ZA B C2 - 1 week ago
Johannesburg, South Africa Adzuna ZA B C2 Full timeMECHANICAL FITTER with OVERHEAD CRANE experience* Knowledge in: Pumps Conveyors Annealing Furnaces Induction Furnaces Compressors Generators* Prepared to work overtime, if and when required
-
FITTER with OVERHEAD CRANE experience
Found in: Talent ZA 2A C2 - 2 weeks ago
Johannesburg, South Africa Pronto Labour Team Full timeMECHANICAL FITTER with OVERHEAD CRANE experience* Knowledge in: Pumps Conveyors Annealing Furnaces Induction Furnaces Compressors Generators* Prepared to work overtime, if and when required
-
Crane Technicians
7 days ago
Johannesburg, South Africa Perfect Placement Recruitment Full timeOur client is SA's leading Crane Manufacturer and Sole SWF Distributor. They are looking for a LMI Technician to join their team. Area: Johannesburg (Spartan) **Salary**: R120 - R230 per hour (depending on experience) Qualifications: Millwright or Electrician Required Experience: Mechanical Duties will include but not limited to: - Working on lifting...
-
Crane Operators
Found in: Talent ZA C2 - 2 weeks ago
Johannesburg, South Africa Primeserv Denverdraft Full timeOur engineering client is looking for your expertise as a Crane Operator. If you meet all the minimum requirements please email your CV to infoct@primeserv.co.za.Minimum Requirements:South African CitizenMinimum of four years' experience Valid Crane License - 30-250 TonValid EC1 License Credit and Criminal Clear
-
Crane Technician
Found in: Adzuna ZA B C2 - 4 days ago
Johannesburg, South Africa Adzuna ZA B C2 Full timeMinimum requirements:2 years minimum experience post apprentice experience working on overhead cranesRed seal trade tested Electrician/MillwrightProfessional membership with ECSA | LMI will be highly advantageousValid drivers licenseValid Working at heights competencyGood communication skillsConsultant: Sergio Davids - Dante Personnel East Rand
-
Crane Technician
Found in: Whatjobs ZA C2 - 4 days ago
Johannesburg, South Africa Dante Personnel Full timeMinimum requirements: 2 years minimum experience post apprentice experience working on overhead cranes Red seal trade tested Electrician/Millwright Professional membership with ECSA | LMI will be highly advantageous Valid drivers license Valid Working at heights competency Good communication skills Consultant: Sergio Davids - Dante Personnel East Rand ...
-
Crane Technician
Found in: Talent ZA 2A C2 - 5 days ago
Johannesburg, South Africa Dante Personnel Full timeMinimum requirements:2 years minimum experience post apprentice experience working on overhead cranesRed seal trade tested Electrician/MillwrightProfessional membership with ECSA | LMI will be highly advantageousValid drivers licenseValid Working at heights competencyGood communication skillsConsultant: Sergio Davids - Dante Personnel East Rand
-
Crane Operators
Found in: Adzuna ZA B C2 - 2 weeks ago
Johannesburg, South Africa Adzuna ZA B C2 Full timeMinimum Requirements:South African CitizenMinimum of four years' experience Valid Crane License - 30-250 TonValid EC1 License Credit and Criminal Clear
-
Crane Operators
Found in: Whatjobs ZA C2 - 4 days ago
Johannesburg, South Africa Primeserv Recruitment Full timeMinimum Requirements: South African Citizen Minimum of four years' experience Valid Crane License - 30-250 Ton Valid EC1 License Credit and Criminal Clear
-
Crane Operators
Found in: Talent ZA 2A C2 - 2 weeks ago
Johannesburg, South Africa Primeserv Recruitment Full timeMinimum Requirements:South African CitizenMinimum of four years' experience Valid Crane License - 30-250 TonValid EC1 License Credit and Criminal Clear
-
Transformer Testbay Assistant
1 week ago
Johannesburg, South Africa Cletech Recruitment Full timeResponsible for: - Perform all tests as prescribed by sans 780/iec60076 - Operating overhead cranes in department - Safely operating all measuring equipment in department
-
Traveling Crane Technician
Found in: Talent ZA C2 - 2 weeks ago
Johannesburg, South Africa Boardroom Appointments Full timeWe are seeking a highly skilled and experienced Traveling Crane Technician to join our clients team. Our client is a recognized worldwide leader in heavy lifting and engineered transport. The ideal candidate will possess expertise in hydraulics, electronics, and mechanical systems, with a proven track record in maintenance and repair of heavy lifting...
-
Senior Engineer Overhead Lines
Found in: beBee S ZA - 1 week ago
Gauteng, Johannesburg, South Africa Trans Africa Projects Full timeTrans Africa Projects’s job vacancy, Career and Recruitment Job title : Senior Engineer Overhead Lines jobs in Gauteng Job Location : Gauteng, Johannesburg Deadline : 18-May-24 Quick Recommended Links Jobs by Location Job by industries Purpose of the Job: Responsible for solving a variety of complex overhead line problems and providing specialist...
-
Traveling Crane Technician
1 week ago
Johannesburg, South Africa Boardroom Appointments Full time**Minimum Requirements**: - Red Seal certification or equivalent qualification in relevant trade (e.g., Millwright, Heavy Equipment Technician, etc.). - Experience in maintenance and repair of heavy lifting machinery, with a focus on cranes and rolling machines. - Proficiency in hydraulics, electronics, and mechanical systems, including troubleshooting and...
-
Traveling Crane Technician
Found in: beBee S ZA - 2 weeks ago
Gauteng, Johannesburg, South Africa Boardroom Appointments Full timeBoardroom Appointments’s job vacancy, Career and Recruitment Job title : Traveling Crane Technician – JHB jobs in Gauteng Job Location : Gauteng, Johannesburg Deadline : April 28, 2024 Quick Recommended Links Jobs by Location Job by industries Minimum Requirements: Red Seal certification or equivalent qualification in relevant trade (e.g.,...
-
Qualified Hydraulics Fitter
Found in: Whatjobs ZA C2 - 4 days ago
Johannesburg, South Africa ESG Recruitment Full timeExperience with Hydraulics & Pneumatics Maintenance & Repairs Mechanical Fitter Qualified in the trade Overhead crane/Induction furnace experience Sober habits Own transport
-
Qualified Hydraulics Fitter
Found in: Adzuna ZA B C2 - 1 week ago
Johannesburg, South Africa Adzuna ZA B C2 Full timeExperience with Hydraulics & PneumaticsMaintenance & RepairsMechanical FitterQualified in the tradeOverhead crane/Induction furnace experienceSober habitsOwn transport