CNC Programmer

3 weeks ago


Johannesburg, South Africa ESG Recruitment Full time
CNC Programmer /Setter - Milling
  • Qualified Artisan
  • Programming on Mastercam and on the machine
  • Fanuc controls (Heidenhain will be an advantage)
  • 4 to 5 Axis
Responsibility
  • Plan machining operations by reviewing work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and
  • Programming mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part
  • Analyse drawings, blueprints, and design data in order to calculate correct part dimension for machines, tool selection, machine speeds, and feed
  • Set up and operate CNC equipment as
  • Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and
  • Use precision measuring instruments including micrometres and callipers, and fixtures and gauges to check work and perform detailed inspection of parts produced
  • Read Instrumentation and gauges to accurately measure dimensions on parts being machined within specified
  • Wear proper safety equipment and comply with company safety rules at all times
  • Perform periodic checks on equipment and solve problems as detected.
  • To ensure all work pieces that are produced conform & are ready for the next operation, this includes fettling, de-burring, etc.
  • Work on computerised CAD system
  • Ability to read and interpret drawings
  • Ensure that a constant clear line of communication is maintained with operators and setters more importantly during shift change overs.
  • Ensure that the production in monitors and evaluated on the machine that has been programmed to ensure minimum
  • Maintain the highest standards of cleanliness in the workplace and at the
  • Maintain safety standards by ensuring safe work methods and comply with the companys safety instructions.
  • Use the appropriate personal safety equipment and obey all the safety
  • Report processes or employees that contravene safety, environmental standards and
  • Assess and ensure that the employees conduct their work in a healthy, safe and according to the company standard, policies and

  • CNC Programmer

    7 days ago


    Johannesburg, South Africa Pronto Labour Team Full time

    **CNC Programmer**: - 6-8 Years' working experience in Engineering Industry - Matric or Equivalent

  • CNC Programmer

    4 weeks ago


    Johannesburg, South Africa Pronto Labour Team Full time

    **CNC programmer - 3 month Fixed Term Contract**: - Matric - MINIMUM 4-5 Year's working experience in an** ENGINEERING** **ENVIRONMENT


  • Johannesburg, South Africa ITHEMBALETHU ENGINEERING MANUFACTURERS Full time

    Our company is looking for a well experienced Programmer/Setter/Operator, to start immediately. Duties include: - Preparing and Operating CNC Lathe and CNC Milling machines to perform tasks such as Drilling, Tapping & Milling. Ability to commute/relocate: - Johannesburg, Gauteng: Reliably commute or planning to relocate before starting work (required)


  • Johannesburg, South Africa Trading Places Manufacturing Recruitment Full time

    Our client is a well-established company in the Metal Industries with over 30 years of experience, located in Benoni, South Africa. Their facility is equipped with 12 CNC machines, all utilizing Fanuc Controls. In addition, they employ CAD/CAM systems such as Teksoft, Edgecam, and Mastercam to ensure precision and efficiency in their manufacturing...


  • Johannesburg, South Africa ESG Recruitment Full time

    Qualified TurnerConventional Turning/CNC onboard programmerMinimum 5 years experience in the industryTurning shafts/bushes Cutting threads/KeywaysMust be able to read drawings/use measuring equipment


  • Johannesburg, South Africa Adzuna ZA B C2 Full time

    Qualified TurnerConventional Turning/CNC onboard programmerMinimum 5 years experience in the industryTurning shafts/bushes Cutting threads/KeywaysMust be able to read drawings/use measuring equipment


  • Johannesburg, South Africa ESG Recruitment Full time

    Qualified Turner Conventional Turning/CNC onboard programmer Minimum 5 years experience in the industry Turning shafts/bushes Cutting threads/Keyways Must be able to read drawings/use measuring equipment

  • CNC Programmer

    3 weeks ago


    Johannesburg, South Africa Michelle Taylor Recruitment Full time

    Urgently seeking a Support Technician with the below experience:CNC ProgrammingExperience with EdgeCAM or MasterCAM / CAM Software / Fusion softwareDuties:CNC Programming training & supportManual data input programmingG-Code Programming

  • CNC Programmer

    3 weeks ago


    Johannesburg, South Africa Adzuna ZA B C2 Full time

    Urgently seeking a Support Technician with the below experience:CNC ProgrammingExperience with EdgeCAM or MasterCAM / CAM Software / Fusion softwareDuties:CNC Programming training & supportManual data input programmingG-Code Programming

  • CNC Programmer

    3 weeks ago


    Johannesburg, South Africa Michelle Taylor Recruitment Full time

    Urgently seeking a Support Technician with the below experience: CNC Programming Experience with EdgeCAM or MasterCAM / CAM Software / Fusion software Duties: CNC Programming training & support Manual data input programming G-Code Programming


  • Johannesburg, South Africa Oxyon People Solutions Full time

    Urgently looking for CNC Horizontal and Vertical Boring Mill Programmers for a company in Vanderbijlpark. Must know how to program. Rate negotiable

  • CNC Programmer

    4 weeks ago


    Johannesburg, South Africa ESG Recruitment Full time

    Extensive experience with "EDGECAM" computer modeling software.Reading and interpreting technical blueprints and design models.Loading raw materials into the CNC machine.Inputting the product design into the computer modeling software.Choosing and loading the correct cutting tools for the job.Adjusting machine settings to the desired product...

  • CNC Programmer

    3 weeks ago


    Johannesburg, South Africa Adzuna ZA B C2 Full time

    Extensive experience with "EDGECAM" computer modeling software.Reading and interpreting technical blueprints and design models.Loading raw materials into the CNC machine.Inputting the product design into the computer modeling software.Choosing and loading the correct cutting tools for the job.Adjusting machine settings to the desired product...

  • CNC Programmer

    3 weeks ago


    Johannesburg, South Africa ESG Recruitment Full time

    Extensive experience with "EDGECAM " computer modeling software. Reading and interpreting technical blueprints and design models. Loading raw materials into the CNC machine. Inputting the product design into the computer modeling software. Choosing and loading the correct cutting tools for the job. Adjusting machine settings to the desired product...


  • Johannesburg, South Africa ESG Recruitment Full time

    CNC Programming, Setting - MillingOperate 5 axisProgram on the machineExtensive Production environment experienceMin 8 years experienceTrade Qualification not required


  • Johannesburg, South Africa Adzuna ZA B C2 Full time

    CNC Programming, Setting - MillingOperate 5 axisProgram on the machineExtensive Production environment experienceMin 8 years experienceTrade Qualification not required


  • Johannesburg, South Africa ESG Recruitment Full time

    CNC Programming, Setting - Milling Operate 5 axis Program on the machine Extensive Production environment experience Min 8 years experience Trade Qualification not required


  • Johannesburg, South Africa Trading Places Manufacturing Recruitment Full time

    Client based on the East Rand is seeking a young individual for a **contract position** for a CNC Router Operator with some experience in the Woodworking industry. Need some experience working on AlphaCam and AutoCad. **Requirements**: Matric + technical qualification Woodworking industry is essential Entry level with approximately 2 years experience on CNC...


  • Johannesburg, South Africa Red Rock Recruitment Full time

    Our client is looking for a CNC Milling Programmer/Setter/Operator for their Milling machines. The client has HURCO VM10i, HURCO VM20i, and VICTOR V Centre 102 Milling Machines. Essential: - **Must have worked on a HURCO VM20i or VM10I machine,**: - Experienced CNC Milling machine setter, Operator - Must be able to write manual programs - 5+ Years of...

  • Edgecam Programmer

    4 weeks ago


    Johannesburg, South Africa Trading Places Manufacturing Recruitment Full time

    Edgecam Programmer/Setter/Operator for Computer Numerical Control (CNC) Milling/Turning Machine Must be proficient in Edgecam programming. Must have good experience in the engineering and machining industry. Must know their tooling as well as machine setup so to create setup sheets/ tooling required for the operators on the floor. Must be proficient in...