Process Engineering Manager

3 weeks ago

Pietermaritzburg, South Africa Execustaff Recruiting Services Full time
Elimination of waste:
  • Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques.
  • Monitor & reduce scrap (By means of but not limited to the TQM process)
  • Ensure all agreed improvements are timeously planned and implemented.
 
Continuous Improvement:
  • Drive improvement targets through the ME and TQM processes. (With the intention to reduce downtime and cost of poor quality).
  • Ensure Improvement Targets to Budgets are met.
  • Kaizen Initiatives (Drive A3 problem solving activities to eliminate waste, improve Quality and production output within all areas of control).

5âs:
  • Ensure 5S is principles are practiced at all times.
  • Ensure 5S initiatives are implemented on new lines. (Support with 5S improvement activities to ensure 5S is sustained in all areas of control).
 
Health, Safety and Environment:
  • Comply with all applicable compliance obligations to which the company subscribes to.
  • Evaluating processes and equipment to ensure compliance with environmental and safety regulations.
  • Provide a workplace that is without risk of injury and ill-health.
  • Drive initiatives to ensure that we improve our environment and prevent pollution.
  • Correct PPE & PPC Usage in all areas of control (Advise on correct PPE and PPC for facility requirements).
 
Quality:
  • Meet or exceed customer requirements (Ensure products meet customer specifications, standards, and requirements for new and existing components).
  • Risk Based Thinking (Identify risks that will affect quality for new and existing products and implement the required actions to alleviate these risks).
  • Approval of manufacturing processes and equipment (Jigs, fixtures and manufacturing processes will need to be designed, manufactured/ implemented, and bought off/ approved to the relevant standards within the organisation).
  • Assist in trial activities to ensure all internal and customer requirements are met (Manufacturing processes must adhere to the quality requirements within the organization) (MPT).
 
Delivery:
  • Develop, configure, and optimize processes from inception through to start up and customer buy-off.
  • Designing, planning and implementation of equipment layouts and flows.
  • Process optimization (With the objective of reducing downtime and cost of poor quality).
  • Develop best practices, routines, and innovative solutions with the objective of increasing production output as well as improving quality to a defined budget.
  • APQP (Support cross-functional team to ensure that all customer requirements are met, and the project is delivered as per the master schedule within the project budget).
  • Define and implement process documentation and operating instructions.
  • Establish safety procedures to mitigate the risks identified in all areas of control.
  • Define set process parameters to ensure that the inputs are controlled to produce consistent product that complies to all the customer requirements.
  • Conduct Process capability studies to ensure that CPK and PPK requirements are always maintained.
  • Document and manage changes to the processes within your area of control (Adhering with the companiesâ procedures and policies at all times).
 
Attendance:
  • Responsible for teamsâ attendance to ensure that the company target is met (Since the role is to support production, your teamâs attendance is vital for the successful running of the plant).
 
People Development:
  • Responsible for the personal development of your team in line with company strategy
  • Adhere to HR policies & procedures.
  • Conduct Performance reviews on all team members.
  • Conduct and manage IDPâs on all team members (Ensure all team members are adequately trained to perform duties that are assigned to them. Training records are to be maintained).
 
General:
  • Carry out all reasonable instructions / tasks (Carry out any reasonable instructions / tasks issued by the General Manager).
  • Uphold the Company Vision & Values (Act in the best interest of the company in accordance with all the Company Policy & Procedures).
 
Internal matrix customers:  
  • Quality
  • Maintenance (Tool and Plant)
  • Projects
  • Production

External Customers:  
  • OEM
  • External Suppliers

Technical skills and specialist knowledge:
  • Knowledge of MS Office
  • Problem solving Methodology.
  • General understanding of press and injection moulding tool design and manufacture
  • General understanding of the operation of metal presses and injection moulding machines
  • General understanding of the process parameters in metal pressing and injection moulding
  • Familiarity with environmental and safety, health, and environment regulations
.
Experience:
  • Design / Draughting experience
  • CAD
  • Use of Measuring Equipment
  • Project Management experience
  • Experience in a Production Engineering Environment
  • 5 to 10 yearsâ experience in Process Engineering.
  • Minimum of 3 years managerial experience.
 
Qualifications:
  • Grade 12 (Critical)
  • Bachelorâs degree in engineering or equivalent

Other:
  • Analytical thinker with interpersonal skills

  • Process Engineering Manager

    2 months ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Elimination of waste: Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques. Monitor & reduce scrap (By means of but not limited to the TQM process) Ensure all agreed improvements are timeously planned and implemented. Continuous Improvement: Drive improvement targets through the ME and TQM processes. (With...

  • Process Engineering Manager

    2 months ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Elimination of waste:Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques.Monitor & reduce scrap (By means of but not limited to the TQM process)Ensure all agreed improvements are timeously planned and implemented. Continuous Improvement:Drive improvement targets through the ME and TQM processes. (With the...

  • Process Engineering Manager

    2 months ago

    Pietermaritzburg, South Africa Adzuna ZA B C2 Full time

    Elimination of waste:Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques.Monitor & reduce scrap (By means of but not limited to the TQM process)Ensure all agreed improvements are timeously planned and implemented. Continuous Improvement:Drive improvement targets through the ME and TQM processes. (With the...

  • Process Engineering Manager

    3 weeks ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Elimination of waste:Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques.Monitor & reduce scrap (By means of but not limited to the TQM process)Ensure all agreed improvements are timeously planned and implemented. Continuous Improvement:Drive improvement targets through the ME and TQM processes. (With the...

  • Process Engineering Manager

    3 weeks ago

    Pietermaritzburg, South Africa Adzuna ZA B C2 Full time

    Elimination of waste:Drive ME Improvement objectives by analysis of lost time using the relevant problem-solving techniques.Monitor & reduce scrap (By means of but not limited to the TQM process)Ensure all agreed improvements are timeously planned and implemented. Continuous Improvement:Drive improvement targets through the ME and TQM processes. (With the...

  • Process Safety Engineer

    1 week ago

    Pietermaritzburg, South Africa Elchemie Full time

    International Chemical Manufacturing company is looking for a Process Safety Engineer (an innovative & resourceful problem-solver) , who will operate from the Head Office, close to Pietermaritzburg, KZN.  The purpose of the job is to manage all process engineering, process safety management and assigned capex projects for the manufacturing facility to...

  • Operations Manager

    2 months ago

    Pietermaritzburg, South Africa Farm Manager SA Full time

    **Pietermaritzburg Area - KwaZulu Natal**: Our client is looking for an Operations Manager to join the team. The field work and installations will run between Kokstad, Underberg, Midlands, North Coast (Matubatuba), South Coast, Ixopo, Harding, Harrismith **MINIMUM REQUIREMENTS** - Mechanical/ Maintenance qualification or experience in the following would...

  • Process Engineer

    2 months ago

    Pietermaritzburg, South Africa Pronel Personnel Full time

    Our client is looking to recruit an intern to fill a role of sales and junior process engineer.  This would be for a 4 year internship. Role and training programme will entail: Engaging with design / sales team and customers to develop a workable solution in a Process and Instrument diagram to specifications put forward Conceptualize and draw the P&ID in...

  • Process Engineer

    2 months ago

    Pietermaritzburg, South Africa Pronel Personnel Full time

    Our client is looking to recruit an intern to fill a role of sales and junior process engineer.  This would be for a 4 year internship.Role and training programme will entail:Engaging with design / sales team and customers to develop a workable solution in a Process and Instrument diagram to specifications put forwardConceptualize and draw the P&ID in 2D...

  • Process Engineer

    2 months ago

    Pietermaritzburg, South Africa Pronel Personnel Full time

    Our client is looking to recruit an intern to fill a role of sales and junior process engineer.  This would be for a 4 year internship.Role and training programme will entail:Engaging with design / sales team and customers to develop a workable solution in a Process and Instrument diagram to specifications put forwardConceptualize and draw the P&ID in 2D...

  • Process Instrumentation Graduate

    3 months ago

    Pietermaritzburg, South Africa Belgotex Floorcoverings (Pty) Ltd. Full time

    The purpose of this position is to offer an opportunity to utilize and expand your academic background in Instrumentation and Controls Engineering while working with a team of I&C Engineers and Technicians in assisting in troubleshooting, working on PLC’s and installing and maintaining wiring. **Responsibilities**: - Perform inspections and fault finding...

  • Production Process Technician

    3 months ago

    Pietermaritzburg, South Africa Pronel Personnel Full time

    **Requirements**: - Trade test / Engineering Diploma - Plastic, rubber or silicon injection / extrusion experience - Process engineering experience - 5 Years experience in a manufacturing environment **Key performance areas**: - Provide technical oversight to supervisors and setters in the department to ensure safe and proper sue of equipment in the...

  • E-coating Process Technician

    2 months ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Job Requirements:Grade 12 (Critical)Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge:Knowledge of MS OfficeKnowledge of problem-solving tools.Risk based thinking.Ability to interpret technical drawings. Experience:Experience in a Production Engineering EnvironmentExperience in a Manufacturing / Fabrication...

  • E-caoting Process Technician

    3 months ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Job Requirements:Grade 12 (Critical)Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge:Knowledge of MS OfficeKnowledge of problem-solving tools.Risk based thinking.Ability to interpret technical drawings. Experience:Experience in a Production Engineering EnvironmentExperience in a Manufacturing / Fabrication...

  • E-caoting Process Technician

    3 months ago

    Pietermaritzburg, South Africa Adzuna ZA B C2 Full time

    Job Requirements:Grade 12 (Critical)Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge:Knowledge of MS OfficeKnowledge of problem-solving tools.Risk based thinking.Ability to interpret technical drawings. Experience:Experience in a Production Engineering EnvironmentExperience in a Manufacturing / Fabrication...

  • E-caoting Process Technician

    3 months ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Job Requirements: Grade 12 (Critical) Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge: Knowledge of MS Office Knowledge of problem-solving tools. Risk based thinking. Ability to interpret technical drawings. Experience: Experience in a Production Engineering Environment Experience in a Manufacturing...

  • CNC Milling Machine Setter Operator/5 Axis

    2 months ago

    Pietermaritzburg, South Africa Azurri engineering Full time

    we are looking for a CNC milling machine operator to set and operate a 6m x 2.2m x1.7m, 5 axis milling machine with a fanuc control - must have own transport - must be able to work shifts - must be able to work overtime when needed - must be able to read complex engineering drawings and work to tolerances of 0.01mm - must be able to read and understand iso...

  • Business Process Manager

    4 months ago

    Pietermaritzburg, South Africa Pronel Personnel Full time

    The Business Process Analyst will collaborate with cross-functional teams to identify process improvement opportunities, gather and analyse data, and develop and implement process improvement initiatives. **Responsibilities**: **Business Process Analysis**: Conduct a thorough analysis of existing business processes, identify areas for improvement, and...

  • E-coating Process Technician

    3 weeks ago

    Pietermaritzburg, South Africa Execustaff Recruiting Services Full time

    Job Requirements:Grade 12 (Critical)Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge:Knowledge of MS OfficeKnowledge of problem-solving tools.Risk based thinking.Ability to interpret technical drawings.  Experience:Experience in a Production Engineering EnvironmentExperience in a Manufacturing /...

  • E-coating Process Technician

    3 weeks ago

    Pietermaritzburg, South Africa Adzuna ZA B C2 Full time

    Job Requirements:Grade 12 (Critical)Diploma in Process Engineering / Chemical or Mechanical Technical skills and specialist knowledge:Knowledge of MS OfficeKnowledge of problem-solving tools.Risk based thinking.Ability to interpret technical drawings.  Experience:Experience in a Production Engineering EnvironmentExperience in a Manufacturing /...