Qc Supervisor/welding Coordinator

2 weeks ago

Cape Town, Western Cape, South Africa SFG Engineering Services Full time

Job Requirements:

  • Senior Certificate


 Senior Welding Inspector
  • Level
  • IWS
  • NDT experience and /or qualification preferably Level
  • ISO 3834 training
  • ISO 9001 Training
  • Welding coordination experience
  • Root cause analysis experience
  • 3 to 5 years of relevant experience.

Responsibilities:

  • Applicable knowledge regarding all relevant standards to execute relevant verification(s).
  • Responsible for welding procedure qualifications and compliance.
  • Responsible for performance qualifications.
  • Provide production with necessary welding quality support.
  • Responsible for welding inspections.
  • Responsible for safety requirements compliance, procedures, and policies.
  • Responsible for and maintaining quality assurance.
  • Project management.
  • Relevant training.
  • Perform relevant evaluation.
  • Stand in for Head of Quality Assurance

Standards:

  • Verify base material and filler metal compliance.
  • Verify filler metal storage/handling compliance.
  • Verify inspection records compliance.
  • Verify proper documentation compliance.
  • Verify base material and filler metal compatibility.
  • Certify documented results compliance.
  • Verify procedure qualification records compliance.
  • Verify welding procedure compliance.
  • Verify NDE procedures compliance Assist in verifying ISO compliance.

Performance Qualification:

  • Witness welder performance qualification
  • Verify welder qualification compliance.
  • Verify welder qualification records compliance
  • Request welder performance requalification

Welding Inspection:

  • Perform visual examinations.
  • Verify examination procedure compliance.
  • Review examination results in compliance
  • Develop visual inspection procedures (before, during, and after welding)
  • Provide NDE inspection planning and scheduling (before, during, and after a project)
  • Review welding inspection reports
  • Verify implementation of nondestructive and destructive evaluation methods
  • Prepare visual inspection requirements.
  • Prepare N DE requirements.
  • Report investigation results of quality inspection disputes
  • Prepare destructive testing requirements Procedure Qualification:
  • Verify welding equipment appropriateness.
  • Verify edge preparation compliance.
  • Verify joint geometry compliance Witness procedure qualification.
  • Verify welding procedure qualification compliance
  • Review and approve welding procedures.
  • Develop welding procedures.

Production:

  • Verify welder qualification appropriateness.
  • Verify production welding compliance Verify personnel qualification when requested for specific projects.
  • Perform Welding Coordination Activities and responsibilities to ISO 14731 by acting as the RWC (Responsible Welding Coordinator).
  • Ensuring guidance to the welders through advanced knowledge of welding processes, procedures, specifications, and codes.
  • Assist welders by inspecting their work and assisting in problemsolving whenever there is confusion.
  • Performing visual inspections on items in progress to check for deformities and scope of improvement, and/or managing individuals performing the inspections.
  • Making use of stress equipment for inhouse bend tests on weld joints for procedure and welder qualifications.
  • Recording the reading of tests for future reference.
  • Responsible for testing and coding new and existing artisans to specified codes & standards.

Safety:

  • Verify safety requirements compliance.
  • Develop safety procedures and policies.

Quality Assurance:

  • Perform audits and surveillance.
  • Develop quality assurance plans.
  • Prepare base material control requirements.
  • Prepare weld consumable control requirements.
  • Prepare audit and surveillance plans.
  • Prepare documentation control requirements.
  • Assist in Management of the QMS
  • Assist in Managing IIRS
  • Assist in ensuring business reaches COPQ and NCQ targets.
  • MBU Participation
  • Act as a standin for the Head of Quality Assurance when required.

Project Management:

  • Review contract requirements
  • Review vendor proposal compliance
  • Prepare weld inspection bid specifications.
  • Prepare purchase specifications.
  • Determine vendor capacity and capability.
  • Select vendor.

Training:

  • Develop and provide a training program for the
  • AWI
  • Develop visual inspection training.
  • Verify implementation of visual inspection training

Evaluation:

  • Evaluate AWI performance.
  • Perform inspection results trend analysis.

  • Welding Supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa JSM Business Services Full time

    Qualifications, Knowledge, and Experience: Matric (or equivalent) Red Seal (or equivalent) Proven experience welding chromemolly piping (P11/P22). A proven track record as a welding supervisor on a piping project. Experience should reflect the supervision of at least 10 welders on a piping project. Read, write, and speak English. Knowledge of Occupational...

  • Piping/welding Supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa Swift Human Resources Full time

    Our client is looking for Piping/Welding Supervisors in Capetown with at least 5 years experience to test for the annual Sasol Shutdown in Secunda.RESPONSIBILITIES: Coordinates dismantling, moving and setting upequipment at the new work site Ensure that welding is done according to customerspecifications and that all processes are recordedheat treatment as...

  • Certified Welding Engineer

    2 weeks ago

    Cape Town, Western Cape, South Africa Lotus Recruitment Full time

    KEY REQUIREMENTS TO MEET FOR CONSIDERATION You will have a BSc or BEng degree in Mechanical Engineering, coupled with a IIW IWE diploma/certification and 2-3 years experience as a Welding Engineer.You will have experience in reviewing weld/inspection specifications/codes and standards, as well as providing project and technical support during projects and...

  • QA/qc Coating Supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa Easy Recruit SA Full time

    Diploma holder or bachelor's degree -in relevant engineering. Total 12 year of Experience of which 08yrs QC experience with direct scope description as coating inspector/or supervisor. Knowledge of the ISO9000 series International Standards Qualified to NACE Level II Critical Coatings Certification, CSWIP Level II, or equivalent. Experience in Building...

  • Certified Welding Engineer

    2 weeks ago

    Cape Town, Western Cape, South Africa Lotus HR & Recruitment Full time

    Our client, a prestigious turnkey engineering and steel fabrication company, seeks to employ a qualified and certified Welding Engineer, with a background in the Engineering sector to join their team in Cape Town.Please note that this is not a senior role, however it does require a BSc or BEng degree in Mechanical Engineering, coupled with IIW IWE...

  • Qc Level 2 Inspector

    2 weeks ago

    Cape Town, Western Cape, South Africa AMS GROUP Full time

    QC Inspector - MechanicalAMS Group a Mechanical and Civil Engineering company based in Ottery, Western Cape requireLevel 2 QC's (SAIW) with the following skills.KEY PERFORMANCE AREAS No criminal record Be in physical good health Set up a site inspection/audit programme, for site activities for subcontractors. Ensure that fabrication documentation is fully...

  • Qc Inspector

    2 weeks ago

    Cape Town, Western Cape, South Africa Lotus HR & Recruitment Full time

    Our client, a prestigious turnkey engineering solutions company, focuses on steel fabrication, seeks to employ a qualified and experienced QC Inspector, with a solid background in the steel fabrication sector.Please note that this is a junior to mid-career level role, specifically focused on Quality Control in the Steel fabrication sector, with very specific...

  • Qc Administrator

    2 weeks ago

    Cape Town, Western Cape, South Africa Lotus HR & Recruitment Full time

    Our client, a prestigious turnkey engineering solutions company, focuses on steel fabrication, seeks to employ an industry specific Quality Control Administrator/Junior Document Controller to compile data books, arrange NDT requests, maintain quality databases and ensure HSE regulationsKEY REQUIREMENTS TO MEET FOR CONSIDERATIONYou must be able to work...

  • Qc Inspector Ii

    2 weeks ago

    Cape Town, Western Cape, South Africa 3CMETAL BELMET PTY LTD Full time

    Job Purpose: To perform, and monitor quality activities to agreed company, quality and client standards.Responsibilities / Duties / Job Skills:To continuously review quality control processes, procedures and capabilities in order to sustain the most cost effective and efficient methods for meeting quality requirements and making recommendation for...

  • Engineering Qc Administrator

    2 weeks ago

    Cape Town, Western Cape, South Africa Lotus HR & Recruitment Full time

    Our client, a prestigious turnkey engineering solutions company, focuses on steel fabrication and maintenance, has a 6-month contract for and industry specific Quality Control Administrator/Junior Document Controller to compile data books, arrange NDT requests, maintain quality databases and ensure HSE regulations***KEY REQUIREMENTS TO MEET FOR...

  • Qc Scientist

    2 weeks ago

    Cape Town, Western Cape, South Africa BBI Solutions Full time

    Vacancy No VN118Basis PermanentWork Location Cape TownJob DetailsThe BBI Group aim to create a world where everyone has the opportunity for a better quality of life. We have served the global diagnostics industry for over 50 years and due to our continued growth, we are seeking a QC Scientist to join our team. This is a permanent, full time position based at...

  • Fabrication Coordinator

    2 weeks ago

    Cape Town, Western Cape, South Africa Easy Skill Full time

    Project: LAPA SW Job Function: Site Fabrication Coordinator Date of start: July 2024 Employment: Full-time (12 hours per day) Sundays off Minimum duration: 7 months Location: South Africa, Saldanha (in vicinity of Cape town) Languages: English Specific Roles and Responsibilities include:Oversee fabrication, inspection, testing and load-out of all structures...

  • Qc Co-ordinator

    2 weeks ago

    Cape Town, Western Cape, South Africa SFG Engineering Services Full time

    Job requirements: 2 years' experience with B-Tech Quality Management / Packaging Technology or Similar Knowledge of Part & Process Control Development and PPAP Keen eye for detail Knowledge of Packaging Materials would be an advantage. Ability to work on MS office Report writing Good at problem solving Good communication skills Logical recordkeeping Good...

  • Qc Student

    2 weeks ago

    Cape Town, Western Cape, South Africa BBI Solutions Full time

    Vacancy No VN123Basis StudentWork Location Cape TownJob DetailsThe BBI Group aim to create a world where everyone has the opportunity for a better quality of life. We have served the global diagnostics industry for over 50 years and due to our continued growth, we are seeking a QC Student to join our team. This position is based at our facility in Cape...

  • Qc Technician

    2 weeks ago

    Cape Town, Western Cape, South Africa University Of Fort Hare Full time

    South Africa - Western Cape , Cape Town - South (Athlone, Ottery, Philippi) R54.13 per hour Hourly (Market related) Our client is seeking a QC Technician to join their team for a 3-Month Contract position, which will include Shift work.Requirements: Matric or post-matric qualification. 2-3 years experience in a manufacturing environment (food/consumer...

  • Training Centre Supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa 3CMETAL BELMET PTY LTD Full time

    Job PurposeTo identify training and development needs and providing recommendations on programmes and activities. Guiding Managers and Supervisors in developing training skills. Delivering training programmes. Conduct Artisan training.Responsibilities / Duties / Job Skills Manage the Training Centre WS (Equipment, Consumables, Tools and Personnel). Ensure...

  • Qc Lead Micro

    2 weeks ago

    Cape Town, Western Cape, South Africa Biovac Full time

    BIOVAC is one of the leading sterile vaccine manufacturers rooted in Africa, with our core purpose being to "protect life". We are looking to hire a dynamic, passionate, confident, proactive, and meticulous QC Lead Micro & Biological Testing to join a goal-oriented team.QUALIFICATIONS NEEDED: Degree or diploma in Microbiology / Biochemistry/Biotechnology or...

  • Production Supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa Right People Solutions Full time

    Production SupervisorCriteria: Technical Diploma or equivalent experience 3 to 5 years of former valuable experience implementing continuous improvement, lean manufacturing, TPM, FMEA. Experience in process or production discipline Proven experience in supervising or leading a team in manufacturing plant. English verbal and written communication skills, User...

  • Piping Team Leader/supervisor

    2 weeks ago

    Cape Town, Western Cape, South Africa 3C Metal Full time

    General information:Reference :Position description:Job title:Piping Team leader/SupervisorContract type:Fixed-termJob description:Job PurposeLead, Coordinate and Supervise a Piping/Boilermaking Team, in such a manner that all company, quality, safety and client specifications are adhered to.Duties Allocation of Pipe Fitters, Boilermakers & other Team...

  • Qc Technician

    2 weeks ago

    Cape Town, Western Cape, South Africa Recruitment Matters Africa Full time

    Our client is looking for a QC Technician to maintain quality and quantity standards of packed products, and specifically to the standard of PIC's, ISO 22716 and SANS 1841.Salary and Benefits: NegotiableResponsibilities: Line Opening and Line Closing in the Fill & Pack department Regular In-Process line checks to ensure quality and integrity is maintained...